Symbol AP-51xx Скачать руководство пользователя страница 594 | Manualshive

Страница: 594 / 622

Symbol AP-51xx Скачать руководство пользователя страница 594

AP-51xx Access Point Product Reference Guide

B-4

• Downloads both the firmware and configuration files from the TFTP Server and updates

both as needed. Verify the file versions within the

System Settings

screen.

B.1.1.2 Global Options - Using Extended/Standard Options

The following are instructions for automatic firmware and configuration file updates via DHCP using
extended options or standard options configured globally.

The setup example described in this section includes:

•

1 AP-5131 or AP-5181 model access point

•

1 Microsoft Windows DHCP Server

•

1 TFTP Server.

To configure Global options using extended/standard options:

1.

Set the Windows DHCP Server and access point on the same Ethernet segment.

2.

Configure the Windows based DHCP Server as follows:

a. Highlight the Server Domain Name (for example, apfw.symbol.com). From the

Action

menu, select

Set Predefined Options.

b. Add the following 3 new options under

DHCP Standard Options

class:

NOTE

If the firmware files are the same, the firmware will not get updated. If
the configuration file name matches the last used configuration file on the
access point or if the configuration file versions are the same, the access
point configuration will not get updated.

Extended Options

Code

Data type

Access point TFTP Server IP Address
(Note: Use any one option)

181
186

IP address
String

Access point Firmware File Name

187

String

Access point Config File Name
(Note: Use any one option)

129
188

String
String

Standard Options

Code

Data type

Access point TFTP Server IP Address

66

String

Access point Firmware File Name

67

String

«
...
592
593
594
595
596
...
»

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов