Symbol AP-51xx Скачать руководство пользователя страница 158 | Manualshive

Страница: 158 / 622

Symbol AP-51xx Скачать руководство пользователя страница 158

AP-51xx Access Point Product Reference Guide

5-14

5.

Click the

Del

(delete) button to remove a selected table entry.

6.

Click

OK

to return to the LAN1 or LAN2 page, where the updated settings within the

Advanced DHCP Server

screen can be saved by clicking the

Apply

button.

7.

Click

Cancel

to undo any changes made. Undo Changes reverts the settings displayed to

the last saved configuration.

5.1.2.2 Setting the Type Filter Configuration

Each access point LAN (either LAN1 or LAN2) can keep a list of frame types that it forwards or
discards. The Type Filtering feature prevents specific (a potentially unneccesary) frames from being
processed by the access point in order to improve throughput. These include certain broadcast frames
from devices that consume bandwidth, but are unnecessary to access point operations.

Use the

Ethernet Type Filter Configuration

screen to build a list of filter types and configure them

as either allowed or denied for use with the this particular LAN.

To configure type filtering on the access point:

1.

Select

Network Configuration

->

LAN

->

LAN1 (or LAN2)

->

Type Filter

from the access

point menu tree.

The

Ethernet Type Filter Configuration

screen displays for the LAN. No Ethernet types

are displayed (by default) when the screen is first launched.

«
...
156
157
158
159
160
...
»

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов