manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 86 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 86

AP-51xx Access Point Product Reference Guide

3-10

e. Define a

 Default Gateway

 address for the access point’s WAN connection. The ISP or 

a network administrator provides this address. 

f. Specify the address of a

 Primary DNS Server

. The ISP or a network administrator 

provides this address.

6.

Optionally, use the 

Enable PPP over Ethernet

 checkbox to enable 

Point-to-Point over 

Ethernet (PPPoE)

 for a high-speed connection that supports this protocol. Most DSL 

providers are currently using or deploying this protocol. PPPoE is a data-link protocol for 
dialup connections. PPPoE will allow the access point to use a broadband modem (DSL, 
cable modem, etc.) for access to high-speed data networks.

a. Select the 

Keep Alive

 checkbox to enable occasional communications over the WAN 

port even when client communications to the WAN are idle. Some ISPs terminate 
inactive connections, while others do not. In either case, enabling Keep-Alive maintains 
the WAN connection, even when there is no traffic. If the ISP drops the connection after 
the idle time, the access point automatically reestablishes the connection to the ISP.

b. Specify a 

Username

 entered when connecting to the ISP. When the Internet session 

begins, the ISP authenticates the username.

c. Specify a 

Password

 entered when connecting to the ISP. When the Internet session 

starts, the ISP authenticates the password.

For additional access point WAN port configuration options, see 

Configuring WAN Settings 

on page 5-16

. 

7.

Click the 

LAN

 tab to set a minimum set of parameters to use the access point LAN interface. 

a. Select the 

Enable LAN Interface

 checkbox to forward data traffic over the access point 

LAN connection. The LAN connection is enabled by default.

b. Use the 

This Interface 

drop-down menu to specify how network address information 

is defined over the access point’s LAN connection. Select 

DHCP Client

 if the larger 

corporate network uses DHCP. DHCP is a protocol that includes mechanisms for IP 
address allocation and delivery of host-specific configuration parameters from a DHCP 
server to a host. Some of these parameters are IP address, network mask, and gateway. 
Select 

DHCP Server

 to use the access point as a DHCP server over the LAN connection. 

Select the 

Bootp client

 option to enable a diskless system to discover its own IP 

address. 

.

NOTE

Symbol recommends that the WAN and LAN ports should not both be 
configured as DHCP clients.

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов