manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 132 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 132

AP-51xx Access Point Product Reference Guide

4-40

3.

Click 

Apply 

to save any changes to the Logging Configuration screen. Navigating away from 

the screen without clicking the Apply button results in all changes to the screen being lost.

View Log

Click 

View

 to save a log of events retained on the 

access point

. 

The system displays a prompt requesting the administrator 
password before saving the log. After the password has been 
entered, click 

Get File

 to display a dialogue with buttons to 

Open

 

or 

Save

 

the log.txt file. Click Save and specify a location to save 

the log file. 

Use the WordPad application to view the saved log.txt file on a 
Microsoft Windows based computer. Do not view the log file using 
Notepad, as the Notepad application does not properly display the 
formatting of the 

access point

 log file. Log entries are not saved 

in the 

access point

. While the AP is in operation, log data 

temporarily resides in memory. AP memory is completely cleared 
each time the AP reboots. 

Logging Level

Use the 

Logging Level 

drop-down menu to select the desired log 

level for tracking system events. Eight logging levels, (0 to 7) are 
available. 

Log Level 6: Info

 is the 

access point

 default log level. 

These are the standard UNIX/LINUX syslog levels.The levels are as 
follows: 

0 

- Emergency

1 

- Alert

 

2 

- Critical

 

3 

- Errors

 

4 

- Warning

5 

- Notice

6 

- Info

7 

- Debug

Enable logging to an 
external syslog server

The 

access point

 can log events to an external syslog (system log) 

server. Select the 

Enable logging to an external syslog server

 

checkbox

 

to enable the server to listen for incoming syslog 

messages and decode the messages into a log for viewing.

Syslog server IP 
address

If the

 Enable logging to an external syslog server 

checkbox

 

is 

selected,

 

the 

numerical (non DNS name) 

IP address of an 

external syslog server is required in order to route the syslog events 
to that destination.

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов