Symbol AP-51xx, Руководство по продукции, Страница: 122 / 622

AP-51xx Access Point Product Reference Guide 4-30
3. Configure the SNMP v3 Trap Configuration field (if SNMP v3 Traps are used) to modify
the following:
SNMP Version
Use the SNMP Version drop-down menu to specify v1 or v2.
Some SNMP clients support only SNMP v1 traps, while others
support SNMP v2 traps and possibly both, verify the correct traps
are in use with clients that support them.
Add Click Add to create a new SNMP v3 Trap Configuration entry.
Delete Select Delete to remove an entry for an SNMP v3 user.
Destination IP
Specify a
numerical (non DNS name)
destination IP address for
receiving the traps sent by the
access point
SNMP agent.
Port Specify a destination User Datagram Protocol (UDP) port for
receiving traps.
Username Enter a username specific to the SNMP-capable client receiving
the traps.
Security Level Use the Security Level drop-down menu to specify a security
level of noAuth (no authorization), AuthNoPriv (authorization
without privacy), or AuthPriv (authorization with privacy).
The “NoAuth” setting specifies no login authorization or encryption
for the user. The “AuthNoPriv” setting requires login authorization,
but no encryption. The “AuthPriv” setting requires login
authorization and uses the
Data Encryption Standard (DES) .
Passwords Select Passwords to display the Password Settings screen for
specifying authentication and password settings for an SNMP v3
user. The maximum password length is 11 characters. Use the
Authentication Algorithm drop-down menu to specify MD5 or
SHA1 as the authentication algorithm. Use the Privacy Algorithm
drop-down menu to define an algorithm of DES or AES-128bit .
If entering the same username on the SNMP Traps and SNMP
Access screens, the password entered on the SNMP Traps page
overwrites the password entered on the SNMP Access page. To
avoid this problem, enter the same password on both pages.
Add
Click
Add
to create a new SNMP v1/v2c Trap Configuration entry.