Symbol AP-51xx, Руководство по продукции, Страница: 327 / 622

Command Line Interface Reference
The access point Command Line Interface (CLI) is accessed through the serial port or a Telnet session.
The access point CLI follows the same conventions as the Web-based user interface. The CLI does,
however, provide an “escape sequence” to provide diagnostics for problem identification and
resolution.
The CLI treats the following as invalid characters:
' " \ & $ ^ * + ? [ ( { | , < >
In order to avoid problems when using the CLI, these characters should be avoided.
8.1 Connecting to the CLI
8.1.1 Accessing the CLI through the Serial Port
To connect to the access point CLI through the serial port:
1. Connect one end of a null modem serial cable to the access point’s serial connector.
2. Attach the other end of the null modem serial cable to the serial port of a PC running
HyperTerminal or a similar emulation program.
3. Set the HyperTerminal program to use 19200 baud, 8 data bits, 1 stop bit, no parity, no flow
control, and auto-detect for terminal emulation.
4. Press <ESC> or <Enter> to enter into the CLI.
NOTE If using an AP-5131 model access point, a null modem cable is required. If
using an AP-5181 model access point, an RJ-45 to Serial cable is required
to make the connection.