Symbol AP-51xx Скачать руководство пользователя страница 102

Страница: 102 / 622

AP-51xx Access Point Product Reference Guide

4-10

Click

Apply

to save any changes to the access point Access screen. Navigating away from

the screen without clicking the Apply button results in all changes to the screen being lost.

10. Click

Undo Changes

(if necessary) to undo any changes made. Undo Changes reverts the

settings displayed on the access point Access screen to the last saved configuration.

11. Click

Logout

to securely exit the access point Symbol Access Point applet. A prompt

displays confirming the logout before the applet is closed.

4.3 Managing Certificate Authority (CA) Certificates

Certificate management includes the following sections:

•

Importing a CA Certificate

•

Creating Self Certificates for Accessing the VPN

4.3.1 Importing a CA Certificate

certificate authority (CA)

is a network authority that issues and manages security credentials and

public keys for message encryption. The CA signs all digital certificates that it issues with its own

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AP-51xx

Отзывы:

Symbol AP-51xx, Руководство по продукции, Страница: 102 / 622

Результаты поиска

Содержание AP-51xx

Отзывы: