Symbol AP-51xx Скачать руководство пользователя страница 170

Страница: 170 / 622

AP-51xx Access Point Product Reference Guide

5-26

To configure dynamic DNS for the access point:

Select

Network Configuration

WAN

DynDNS

from the access point menu tree.

Select the

Enable

checkbox to allow domain name information to be updated when the IP

address associated with that domain changes.

A username, password and hostname must be specified for domain name information to be
updated.

Enter the DynDNS

Username

for the account you wish to use for the access point.

Enter the DynDNS

Password

for the account you wish to use for the access point.

Provide the

Hostname

for the DynDNS account you wish to use for the access point.

Click the

Update DynDNS

button to update the access point’s current WAN IP address with

the DynDNS service.

NOTE

The username, password and hostname are required to be registered at

http://www.dyndns.com

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AP-51xx

Отзывы:

Symbol AP-51xx, Руководство по продукции, Страница: 170 / 622

Результаты поиска

Содержание AP-51xx

Отзывы: