Symbol AP-51xx Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 622

Symbol AP-51xx Скачать руководство пользователя страница 114

AP-51xx Access Point Product Reference Guide

4-22

users and configuring the access point. All the fields available within the access point are also
configurable within the MIB.

The access point SNMP agent functions as a command responder and is a multilingual agent
responding to SNMPv1, v2c and v3 managers (command generators). The factory default
configuration maintains SNMPv1/2c support of the community names, hence providing backward
compatibility.

SNMP v1/v2c community definitions and SNMP v3 user definitions work independently, and both use
the

Access Control List (ACL)

of the

SNMP Access Control

sub-screen.

Use the

SNMP Access

screen to define SNMP v1/v2c community definitions and SNMP v3 user

definitions. SNMP version 1 (v1) provides a strong network management system, but its security is
relatively weak. The improvements in SNMP version 2c (v2c) do not include the attempted security
enhancements of other version-2 protocols. Instead, SNMP v2c defaults to SNMP-standard
community strings for read-only and read/write access. SNMP version 3 (v3) further enhances
protocol features, providing much improved security. SNMP v3 encrypts transmissions and provides
authentication for users generating requests.

To configure SNMP v1/v2c community definitions and SNMP v3 user definitions for the access point:

1.

Select

System Configuration

- >

SNMP Access

from the access point menu tree.

«
...
112
113
114
115
116
...
»

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов