Symbol AP-51xx Скачать руководство пользователя страница 120 | Manualshive

Страница: 120 / 622

Symbol AP-51xx Скачать руководство пользователя страница 120

AP-51xx Access Point Product Reference Guide

4-28

4.4.2 Enabling SNMP Traps

SNMP provides the ability to send traps to notify the administrator that trap conditions are met. Traps
are network packets containing data relating to network devices, or SNMP agents, that send the
traps. SNMP management applications can receive and interpret these packets, and optionally can
perform responsive actions. SNMP trap generation is programmable on a trap-by-trap basis.

Use the

SNMP Traps Configuration

screen to enable traps and to configure appropriate settings

for reporting this information. Trap configuration depends on the network machine that receives the
generated traps. SNMP v1/v2c and v3 trap configurations function independently. In a mixed SNMP
environment, generated traps can be sent using configurations for both SNMP v1/v2c and v3.

To configure SNMP traps on the access point:

1.

Select

System Configuration

- >

SNMP Access

- >

SNMP Trap Configuration

from the

access point menu tree.

OK

Click

Ok

to return to the SNMP Access screen. Click

Apply

within

the

SNMP Access screen to save any changes made on the SNMP

Access Control screen.

Cancel

Click

Cancel

to undo any changes made on the SNMP Access

Control screen. This reverts all settings for this screen to the last
saved configuration.

«
...
118
119
120
121
122
...
»

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов