manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 211 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 211

Network Management

5-67

1.

From within the RIP Configuration field, select the RIP Type from the drop-down menu. The 
following options are available:

2.

Select a routing direction from the 

RIP Direction

 drop-down menu. 

Both

 (for both 

directions), 

Rx only

 (receive only), and 

TX only

 (transmit only) are available options.

No RIP

The 

No RIP

 option prevents the access point’s router from 

exchanging routing information with other routers. Routing 
information may not be appropriate to share, for example, if the 
access point manages a private LAN.

RIP v1

RIP version 1 is a mature, stable, and widely supported protocol. It 
is well suited for use in stub networks and in small autonomous 
systems that do not have enough redundant paths to warrant the 
overhead of a more sophisticated protocol.

RIP v2 (v1 compat)

RIP version 2 (compatible with version 1) is an extension of RIP v1’s 
capabilities, but it is still compatible with RIP version 1. RIP version 
2 increases the amount of packet information to provide the a 
simple authentication mechanism to secure table updates.

RIP v2

RIP version 2 enables the use of a simple authentication 
mechanism to secure table updates. More importantly, RIP version 
2 supports subnet masks, a critical feature not available in RIP 
version 1. This selection is not compatible with RIP version 1 
support.

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов