manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 296 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 296

AP-51xx Access Point Product Reference Guide

7-6

7.2 Viewing LAN Statistics

Use the 

LAN Stats 

screen to monitor the activity of the access point LAN1 or LAN2 connection. The 

Information 

field of the LAN Stats screen displays network traffic information as monitored over the 

access point LAN1 or LAN2 port. The 

Received 

and

 

Transmitted 

fields of the screen display 

statistics for the cumulative packets, bytes, and errors received and transmitted over the LAN1 or 
LAN2 port since it was last enabled or the access point was last restarted. The

 LAN Stats 

screen is 

view-only with no user configurable data fields.

To view access point LAN connection stats:

1.

Select 

Status and Statistics 

->

 

LAN Stats

 

->

 

LAN1 Stats

 (or LAN2 Stats) from the access 

point menu tree.

2.

Refer to the

 

Information 

field to view the following access point device address 

information:

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов