Symbol AP-51xx Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 622

Symbol AP-51xx Скачать руководство пользователя страница 66

AP-51xx Access Point Product Reference Guide

2-22

For Symbol Power Injector installations:

a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the Power

Injector

Data In

connector.

b. Connect a RJ-45 Ethernet cable between the Power Injector

Data & Power Out

connector and the AP-5131 LAN port.

c. Ensure the cable length from the Ethernet source (host) to the Power Injector and

AP-5131 does not exceed 100 meters (333 ft). The Power Injector has no On/Off power
switch. The Power Injector receives power as soon as AC power is applied. For more
information on using the Power Injector, see

Symbol Power Injector and Power Tap

Systems on page 2-10

.

For standard Symbol 48-Volt Power Adapter (Part No. 50-24000-050) and line cord
installations:

a. Connect RJ-45 Ethernet cable between the network data supply (host) and the AP-5131

LAN port.

b. Verify the power adapter is correctly rated according the country of operation.

c. Connect the power supply line cord to the power adapter.

d. Attach the power adapter cable into the power connector on the AP-5131.

e. Plug the power adapter into an outlet.

16. Verify the behavior of the AP-5131 LED lightpipe. For more information, see

AP-5131 LED

Indicators on page 2-22

.

17. Place the ceiling tile back in its frame and verify it is secure.

The AP-5131 is ready to configure. For information on an AP-5131 default configuration, see

Getting Started on page 3-1

. For specific details on AP-5131 system configurations, see

System Configuration on page 4-1

.

2.8 AP-5131 LED Indicators

The AP-5131 utilizes seven LED indicators. Five LEDs display within four LED slots on the front of the
AP-5131 (on top of the AP-5131 housing) and two LEDs (for above the ceiling installations) are located
on the back of the device (the side containing the LAN, WAN and antenna connectors).

«
...
64
65
66
67
68
...
»

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов