Symbol AP-51xx Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 622

Symbol AP-51xx Скачать руководство пользователя страница 129

System Configuration

4-37

2.

From within the

Current Time

field, click the

Refresh

button to update the time since the

screen was displayed by the user.

The Current Time field displays the current time based on the access point system clock. If
NTP is disabled or if there are no servers available, the system time displays the access
point uptime starting at 1970-01-01 00:00:00, with the time and date advancing.

3.

Select the

Set Date/Time

button to display the

Manual Date/Time Setting

screen.

This screen enables the user to manually enter the access point’s system time using a
Year-Month-Day HH:MM:SS format.

This option is disabled when the Enable NTP checkbox has been selected, and therefore
should be viewed as a second means to define the access point system time.

4.

If using the Manual Date/Time Setting screen to define the access point’s system time, refer
to the

Time Zone

field to select the time used to use as complimentary information to the

information entered within the Manual Date/Time Setting screen.

«
...
127
128
129
130
131
...
»

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов