manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 295 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 295

Monitoring Statistics

7-5

4.

Refer to the

 

Transmitted 

field to reference data received over the access point WAN port.

5.

Click the 

Clear WAN Stats

 button to reset each of the data collection counters to zero in 

order to begin new data collections. The RX/TX Packets and RX/TX Bytes totals remain at 
their present values and are not cleared.

Do not clear the WAN stats if currently in an important data gathering activity or risk losing 
all data calculations to that point.

6.

Click 

Logout 

to securely exit the access point Symbol Access Point applet. A prompt 

displays confirming the logout before the applet is closed.

RX Frame

The 

RX Frame

 field displays the number of TCP/IP data frame 

errors received.

TX Packets

TX packets are data packets sent over the WAN connection. The 
displayed number is a cumulative total since the WAN interface 
was last enabled or the 

access point

 was last restarted. To begin 

a new data collection, see 

Configuring System Settings on page 4-

2

.

TX Bytes

TX bytes are bytes of information sent over the WAN connection. 
The displayed number is a cumulative total since the WAN 
interface was last enabled or the 

access point

 was last restarted. 

To begin a new data collection, see 

Configuring System Settings on 

page 4-2

.

TX Errors

TX errors include dropped data packets, buffer overruns, and carrier 
errors on outbound traffic. The displayed number of TX errors is the 
total of 

TX Dropped

, T

X Overruns

 and 

TX Carrier

 errors. Use this 

information to re-assess 

access point

 location and transmit 

speed.

TX Dropped

The

 TX Dropped

 field displays the number of data packets that fail 

to get sent from the WAN interface.

TX Overruns

TX overruns are buffer overruns on the WAN connection. TX 
overruns occur when packets are sent faster than the WAN 
interface can handle. If TX overruns are excessive, consider 
reducing the data rate, for more information, see 

Configuring the 

802.11a or 802.11b/g Radio on page 5-55

.

TX Carrier

The

 TX Carrier 

field displays the number of TCP/IP data carrier 

errors.

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов