manualshive.com logo in svg

Symbol AP-51xx, Руководство по продукции, Страница: 298 / 622

Поделиться
Скачать
Symbol AP-51xx Скачать руководство пользователя страница 298

AP-51xx Access Point Product Reference Guide

7-8

4.

Refer to the

 

Transmitted 

field to view statistics transmitted over the access point LAN port.

5.

Click the 

Clear LAN Stats

 button to reset each of the data collection counters to zero in 

order to begin new data collections. The RX/TX Packets and RX/TX Bytes totals remain at 
their present values and are not cleared.

RX Overruns

RX overruns are buffer overruns on the 

access point

 LAN port. RX 

overruns occur when packets are received faster than the LAN 
connection can handle them. If RX overruns are excessive, consider 
reducing the data rate, for more information, see 

Configuring the 

802.11a or 802.11b/g Radio on page 5-55

.

RX Frame

The 

RX Frame 

field displays the number of TCP/IP data frame 

errors received.

TX Packets

TX packets are data packets sent over the 

access point

 LAN port. 

The displayed number is a cumulative total since the LAN 
connection was last enabled or the 

access point

 was last 

restarted. To begin a new data collection, see 

Configuring System 

Settings on page 4-2

.

TX Bytes

TX bytes are bytes of information sent over the LAN port. The 
displayed number is a cumulative total since the LAN Connection 
was last enabled or the 

access point

 was last restarted. To begin 

a new data collection, see 

Configuring System Settings on page 4-

2

.

TX Errors

TX errors include dropped data packets, buffer overruns, and carrier 
errors on outbound traffic. The displayed number of TX errors is a 
total of 

TX Dropped,

 

TX Overruns

 and 

TX Carrier

 errors. Use this 

information to re-assess AP location and transmit speed.

TX Dropped

The

 TX Dropped 

field displays the number of data packets that fail 

to get sent from the 

access point

 LAN port.

TX Overruns

TX overruns are buffer overruns on the LAN port. TX overruns occur 
when packets are sent faster than the LAN connection can handle. 
If TX overruns are excessive, consider reducing the data rate, for 
more information, see 

Configuring the 802.11a or 802.11b/g Radio 

on page 5-55

.

TX Carrier

The

 

TX Carrier 

field displays the number of TCP/IP data carrier 

errors.

Содержание AP-51xx















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов