Svantek SVAN 971 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 220

Svantek SVAN 971 Скачать руководство пользователя страница 22

SVAN 971 User Manual

22

Grey colour of the icon means that the
instrument waits for the logging start after
pressing

<Start>

key due to a start delay

or a delay caused by a trigger.

start after pressing

<Start>

key due to a

start delay or a delay caused by a trigger.

“battery”

icon is displayed when the

instrument is powered from the internal
batteries. Icon colour corresponds to the
charging status of the batteries

(green -

30÷100%, yellow – 10÷30%, red – less
than 10%).

“trigger”

icon is displayed when other

than Level or Slope trigger is waiting for
condition fulfilment. The icon appears
alternately with the “play”, “curve” or
“note” icons.

“

plug

” icon is displayed when the

instrument is powered through the USB
socket without using USB interface.

“Level - trigger”

icon is displayed when

the trigger condition is set up to „

Level -

”. The icon appears alternately with the
„play”, “curve” or “note” icons.

“

computer

”

icon is displayed

when

there

is USB connection with the PC.

“Level + trigger“

icon is displayed when

the trigger condition is set up to „

Level

+

”. The icon appears alternately with the

„play”, “curve” or “note” icons.

“RS232”

icon is displayed when the

RS232 port is activated.

“Slope + trigger”

icon is displayed when

the trigger condition is set up to „

Slope+

”.

The icon appears alternately with the
“note” icons.

“Shift”

icon is displayed when the

<Shift>

key is pressed.

“Slope – trigger“

icon is displayed when

the trigger condition is set up to „

Slope-

”. The icon appears alternately with the
“note” icons.

“

underrange

” icon is displayed when

during the measurement the underrange
was registered.

“clock”

icon is displayed when the timer

is

On

. It is active when the instrument is

waiting  for  the  measurement  start  to
occur.  When  the  measurement  start  is
close,  the  icon  changes  its  colour  to
green and start blinking.

“

overload

” icon is displayed when during

the measurement the overload was
registered.

“

vibration

”

icon

is displayed when high

self-vibration level is registered

3.5 D

ATA SAVING

Memory type

All available measurement results and settings can be stored in the
instrument’s memory (micro SD-card) as files in the predefined or
assigned directories. The setup files are stored in the predefined
directory SETUP. The non-predefined directories can be changed by
the user or renamed.

The

SD Card

memory is activated automatically after insertion of the

card. The presence of the SD-card

is indicated by the icon with SD

letters at the top left-hand corner of the display.

- SD-card is inserted

- no SD-card

«
...
20
21
22
23
24
...
»

Содержание SVAN 971





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды