Svantek SVAN 971 Скачать руководство пользователя страница 21

Страница: 21 / 220

SVAN 971 User Manual

profiles and summary results saving. Other functions are switched off, like:
measurement trigger, logger trigger, event recording and timer.

The logger and summary results will be automatically saved in the file with the
name presented in the

Logger Setup

list (

Logger Name: Lxxxx

Default Profile settings:

Profile 1

weighting filter for Peak result (

Filt.Peak(1)=C

weighting filter

for other results (

Filter(1)=A

Fast

for the LEQ detector

(

Detector(1)=Fast

);

Profile 2

weighting filter for Peak result (

Filt.Peak(2)=C

weighting filter

for other results (

Filter(2)=C

Fast

for the LEQ detector

(

Detector(2)=Fast

);

Profile 3

weighting filter for Peak result (

Filt.Peak(3)=Z

weighting filter

for other results (

Filter(3)=Z

Fast

for the LEQ detector

(

Detector(3)=Fast

);

You can change all above-mentioned settings using the

Profiles

position of the

Measurement

section.

The instrument remembers all changes by the next time it is used. You can return to default settings (set
up by the manufacturer) with the use of the

Factory Set.

position in the

Aux. Setup

section.

3.4 D

ESCRIPTION OF ICONS

Indicators of the instrument state

Additional information about the instrument’s state gives the row of icons visible
in the top line of the display.

The real-time clock (RTC) is also displayed in the same line together with icons.

Meanings of icons are as follows:

“

play

”

icon

is displayed when the

measurement is running, and the icon
shape is changing from self to contoured.

Grey colour of the icon means that the
instrument waits for the measurement
start after pressing

<Start>

key due to a

start delay or a delay caused by a trigger.

“

SD Card

” icon is displayed when the

SD-card memory is installed.

Grey colour of the icon means that the
card memory is full.

“

no SD Card

” icon is displayed when no

SD memory card is installed.

“stop”

icon is displayed when the

measurement is stopped.

“pause”

icon is displayed when the

measurement is paused.

“

curve

” icon is displayed when the

current measurement results are logged
into the instrument’s logger file.

“

note-curve

” icon is displayed during

event recording.

Grey colour of the icon means that the
instrument waits for the event recording

Содержание SVAN 971




























































































































































































































Результаты поиска

Содержание SVAN 971

Отзывы:

Бренды по названию

Популярные бренды

Svantek SVAN 971, Руководство пользователя

Результаты поиска

Содержание SVAN 971

Отзывы:

Бренды по названию

Популярные бренды