Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 296 / 1478

1D-65 Engine Mechanical:
Honing or reboring cylinders
1) When any cylinder needs reboring, all other
cylinders must also be rebored at the same time.
Oversize piston specification
2) Using micrometer, measure piston diameter.
3) Calculate cylinder bore diameter to be rebored as
follows.
D = A + B – C
D: Cylinder bore diameter to be rebored.
A: Piston diameter as measured.
B: Piston clearance = 0.02 – 0.04 mm (0.0008 –
0.0015 in.)
C: Allowance for honing = 0.02 mm (0.0008 in.)
4) Rebore and hone cylinder to calculated dimension.
NOTE
Before reboring, install lower crankcase and
tighten to specification to avoid distortion of
bearing bores.
5) Measure piston clearance after honing.
Check Valve
Check check valve for clogging and ball for being stuck.
Specifications
Tightening Torque Specifications
S6RW0C1407001
Size Piston diameter
STD 83.970 – 83.990 mm (3.3059 – 3.3067 in.)
O/S 0.50 84.470 – 84.490 mm (3.3256 – 3.3264 in.)
“e”: 50 mm (1.96 in.) “g”: 26.5 mm (1.04 in.)
“f”: 95 mm (3.74 in.)
I5JB0A142059-01
I2RH01140201-01
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Camshaft housing bolt 11 1.1 8.0 )
Air cleaner outlet hose clamp 3 0.3 2.5 )
IMT valve actuator bolt 6 0.6 4.5 )
Cylinder head cover nut Tighten 11 N
⋅
m (1.1 kgf-m, 8.0 lb-ft) by the
specified procedure
)
Suspension frame mounting bolt 150 15.0 108.5 )
Front lower cross member bolt 55 5.5 40.0 )
Starting motor terminal nut 11 1.1 8.0 )
Generator terminal nut 5 0.5 4.0 )
Battery ground bolt 25 2.5 18.0 )
Ground terminal bolt 11 1.1 8.0 )