Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 664 / 1478

5A-76 Automatic Transmission/Transaxle:
3) Lift up vehicle.
4) With engine is cool, drain A/T fluid referring to “A/T
Fluid Change”.
5) Remove transmission fluid temperature sensor (1)
with O-ring.
Installation
1) Apply A/T fluid to new O-ring.
2) Install new O-ring to transmission fluid temperature
sensor.
3) Install transmission fluid temperature sensor (1), and
tighten A/T fluid temperature sensor to specified
torque.
Tightening torque
Transmission fluid temperature sensor: 10 N·m (
1.0 kgf-m, 7.5 lb-ft)
4) Pour A/T fluid referring to “A/T Fluid Change”.
5) Connect transmission fluid temperature sensor
connector (1).
6) Connect negative cable.
7) Verify that there is no A/T fluid leakage.
Transmission Fluid Temperature Sensor
Inspection
S6RW0C5106020
1) Remove transmission temperature sensor referring
to “Transmission Fluid Temperature Sensor Removal
and Installation”.
2) Immerse temperature sensing part of sensor (1) in A/
T fluid and check resistance between sensor
terminals while heating A/T fluid gradually. If check
result is not as specified, replace sensor.
After inspection, install transmission fluid temp.
sensor and connect connector.
Transmission fluid temperature sensor
resistance (Temperature: Resistance)
0
°
C (32
°
F): 1844 – 2290
Ω
160
°
C (320
°
F): 19.2 – 22.2
Ω
Solenoid Valves (Shift Solenoid Valves, TCC
Solenoid Valve and Pressure Control Solenoid
Valve) Removal and Installation
S6RW0C5106021
Removal
1) Disconnect negative cable at battery.
2) Drain A/T fluid referring to “A/T Fluid Change”.
3) Remove transaxle side cover (1).
1
I4RH01510035-01
1
I4RH01510035-01
1
I7RW01510039-01
1
I4RH01510036-01
1
I4RH01510038-01