Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 147 / 1478

Engine General Information and Diagnosis: 1A-103
DTC P0500: Vehicle Speed Sensor “A”
S6RW0C1104050
Wiring Diagram
DTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
WARNING
!
• When performing a road test, select a place where there is no traffic or possibility of a traffic
accident and be very careful during testing to avoid occurrence of an accident.
• Road test should be carried out by 2 persons, a driver and a tester.
1) With ignition switch turned OFF, connect scan tool.
2) Turn ON ignition switch and clear DTC using scan tool.
3) Warm up engine to normal operating temperature.
4) Drive vehicle at 4,000 rpm (engine speed) with 3rd gear (M/T model) or “3” range (A/T model).
5) Release accelerator pedal and with engine brake applied, keep vehicle coasting for 6 sec. or more (fuel cut
condition for 5 sec. or more) and stop vehicle.
6) For A/T model, drive vehicle at more than 3,700 rpm for 10 sec.
7) Check DTC and pending DTC.
E01-4
BLK
WHT
BLK
WHT
RED
RED/BLK
12V
12V
E01-19
1
2
3
4
WHT/BLK
WHT
RED
WHT RED
WHT
E01 C01
3 4
18 19
5 6 7 10 11
17 20
47 46 49 50 51
21 22
52
16 25
9
24
14
29
55 57 54 53
59
60 58
2
26 27 28
15
30
56 48
32 31 34 35 36 37 40 42 39 38
44
45 43 41 33
1 12 13
23
8 3 4
18 19
5 6 7 10 11
17 20
47 46 49 50 51
21 22
52
16 25
9
24
14
29
55 57 54 53
59
60 58
2
26 27 28
15
30
56 48
32 31 34 35 36 37 40 42 39 38
44
45 43 41 33
1 12 13
23
8
I7RW01110069-01
1. Front left side wheel speed sensor (VSS 1) 3. ABS control module
2. Front right side wheel speed sensor (VSS 2) 4. ECM
DTC detecting condition Trouble area
• Vehicle speed signal is lower than 2 km/h (1.2 mph) for 4
sec. while fuel shuts off at deceleration below 3,600 rpm.
• Vehicle speed signal is lower than 2 km/h (1.2 mph) for 4
sec. even though engine is running at D-Range with more
than 3,600 rpm (A/T model).
(2 driving cycle detection logic)
• Wheel speed sensor (VSS) and/or its circuit
• ABS control module
• ECM