Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 577 / 1478

ABS: 4E-29
7) Turn ignition switch to ON position and select menu
to “HYDRAULIC CONTROL TEST” under
“miscellaneous test” (“MISC. TEST”) mode of
SUZUKI scan tool.
8) Perform the following checks with help of another
person.
Brake pedal (1) should be depressed and then select
testing wheel by SUZUKI scan tool and the wheel (2)
should be turned by another person’s hand. At this
time, check that:
• Operation sound of solenoid is heard and the
wheel turns only about 0.5 sec. (Brake force is
depressurized).
• Operation sound of pump motor is heard and
pulsation is felt at brake pedal.
9) Check for all 4-wheels condition respectively. If a
faulty condition is found, replace ABS hydraulic unit /
control module assembly.
10) After completing the check, turn ignition switch to
OFF position and disconnect SUZUKI scan tool from
DLC.
ABS Hydraulic Unit / Control Module Assembly Components
S6RW0C4506002
CAUTION
!
Never disassemble ABS hydraulic unit / control module assembly, loosen blind plug or remove motor.
Performing any of these prohibited services will affect original performance of ABS hydraulic unit /
control module assembly.
I4RH01450021-01
I6RW0C450006-01
1. ABS hydraulic unit / control module assembly : 16 N
⋅
m (1.6 kgf-m, 11.5 lb-ft) : 26 N
⋅
m (2.6 kgf-m, 19.0 lb-ft)
2. Bracket : 9 N
⋅
m (0.9 kgf-m, 6.5 lb-ft)