Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 896 / 1478

7B-31 Air Conditioning System: Manual Type
Installation
Reverse removal procedure noting the following
instructions.
• If compressor is replaced, pour new compressor oil
referring to “Replenishing Compressor Oil” in
“Operation Procedure for Refrigerant Charge”.
• Tighten compressor mounting bolts to specified
torque.
Tightening torque
Compressor mounting bolt: 25 N·m (2.5 kgf-m,
18.0 lb-ft)
• Evacuate and charge the A/C system referring to
“Evacuation” and “Charge” in “Operation Procedure
for Refrigerant Charge”.
• Adjust drive belt tension referring to “Compressor
Drive Belt Inspection and Adjustment”.
Compressor Assembly Components
S6RW0C7216021
Magnet Clutch Inspection
S6RW0C7216022
• Check armature plate and magnet clutch pulley for
wear and oil soak respectively.
• Check magnet clutch pulley bearing for noise, wear
and grease leakage.
• Measure magnet clutch coil for resistance at 20
°
C (68
°
F). If the measured resistance is out of specification,
replace magnet clutch assembly.
Magnet clutch coil resistance
Standard: 3.5 – 4.0
Ω
6
2
9
4
4
3
1
7
5
8
(a)
(b)
10
I7RW01721023-01
1. Armature plate bolt 5. Shim 9. O-ring
: Apply compressor oil.
: Do not reuse.
2. Compressor 6. Magnet clutch coil 10. Thermal switch
3. Relief valve 7. Magnet clutch pulley : 15 N
⋅
m (1.5 kgf-m, 11.0 lb-ft)
4. Circlip 8. Armature plate : 8 N
⋅
m (0.8 kgf-m, 6.0 lb-ft)
I4RS0A720038-01