Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 877 / 1478

Air Conditioning System: Manual Type 7B-12
A/C System Inspection at ECM
S6RW0C7214003
When checking voltage at ECM terminals related to A/C system, refer to “Inspection of ECM and Its Circuits in Section
1A”.
0.05 – 0.15
(0.5 – 1.5)
(4.2 – 21.3) 0.7 – 1.0
(7 – 10)
(100 – 142) Both low and high
pressure sides indicate
low readings.
Output air is slightly cold. Insufficient refrigerant
in system
(Refrigerant leaking). Using leak detector,
check for leaks and
repair as necessary.
Recharge refrigerant to
a specified amount.
If the pressure reading
is almost 0 when the
manifold gauges are
attached, check for any
leaks, repair them, and
evacuate the system.
0.4 – 0.6
(4 – 6)
(56.9 – 85.3) Pressure on low pressure
side is high.
Pressure on high pressure
side is low.
Both pressure becoming
equal right after A/C is
turned OFF. Internal leak in
compressor. Inspect compressor
and repair or replace
as necessary.
0.40 – 0.45
(4.0 – 4.5)
(57 – 64) 2.0 – 2.5
(20 – 25)
(285 – 355) High pressure reading on
both low and high
pressure sides. Overcharged A/C
system. Adjust refrigerant to
specified amount.
Faulty condenser
cooling operation. Clean condenser.
Faulty condenser
cooling fan operation. Inspect and repair
condenser cooling fan.
High pressure reading on
both low and high
pressure sides.
Low pressure side tubing
is not cold when touched. Presence of air in A/C
system
(Improperly
evacuated). Replace desiccant and
cap with filter.
Inspect quantity of
compressor oil and
presence of
contaminants in oil.
Evacuate system and
recharge with fresh
refrigerant.
0.45 – 0.55
(4.5 – 5.5)
(64 – 78) High pressure reading on
both low and high
pressure sides.
Large amount of frost or
dew on the low pressure
side tubing. Faulty expansion
valve.
Refrigerant flow is not
regulated properly. Replace expansion
valve.
Condition
Possible cause Correction Manifold gauge MPa (kgf/cm
2
) (psi)
Detail
Lo Hi