Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 451 / 1478

Differential: 3B-13
Scan Tool Data
S6RW0C3204009
Scan Tool Data Definitions
Accel pedal Pos (Accelerator pedal position) (%)
Accelerator pedal opening ratio detected by signal on
CAN communication line fed from ECM.
Engine Speed (RPM)
This parameter indicates engine revolution calculated by
4WD control module.
4WD mode (2WD / AUTO / LOCK / ABS mode / Yaw
cont / ESP
®
req)
This parameter indicates 4WD mode according to 2WD/
4WD switch signal status detected by 4WD control
module.
4WD current (A)
This parameter indicates input current of coupling
assembly.
Battery voltage (V)
This parameter indicates battery voltage detected by
4WD control module.
Coupling temp (
°
C,
°
F)
Coupling temperature detected by coupling air
temperature sensor installed in coupling assembly.
Wheel speed (F), Wheel speed (R) (km/h, mph)
Wheel speed is an ABS / ESP
®
control module internal
parameter. It is computed by reference pulses from the
wheel speed sensor.
F-R Wheel speed diff (Front-rear wheel speed
differential) (rpm)
This parameter indicates rotation difference between
front wheel and rear wheel detected by 4WD control
module.
4WD duty (%)
This parameter indicates operation rate of coupling
assembly.
Scan tool data Vehicle condition
Normal condition / reference
values
) Accel pedal Pos
Ignition switch ON after
warmed up engine
Accelerator pedal released 0 – 5%
Accelerator pedal depressed
fully
90 – 100%
) Engine speed At engine idle speed Engine idle speed is display
) 4WD mode
2WD/4WD switch selected to 2WD position 2WD
2WD/4WD switch selected to AUTO position AUTO
2WD/4WD switch selected to LOCK position LOCK
ABS operating ABS mode
Ignition switch ON and engine stop Relay off
Stability control operating Yaw cont
ESP
®
operating ESP
®
mode
) 4WD current Engine running 0 – 200 mA
) Battery voltage At engine idle speed 10 – 14 V
) Coupling temp Engine running –40
°
C – 100
°
C (–40
°
F – 212
°
F)
) Wheel speed (F) Vehicle stop 0 km/h, 0 MPH
) Wheel speed (R) Vehicle stop 0 km/h, 0 MPH
) F-R Wheel speed
Diff
Vehicle stop 0 rpm
) 4WD duty
Ignition switch ON and 2WD/4WD switch selected to
2WD position
0%