Suzuki 2006 SX4, Руководство по обслуживанию

Страница: 297 / 1478

Engine Mechanical: 1D-66
NOTE
The specified tightening torque is also described in the following.
“Air Cleaner Components”
“Electric Throttle Body and Intake Manifold Components”
“Cylinder Head Cover Components”
“Engine Mountings Components”
“Timing Chain Cover Components”
“2nd Timing Chain and Chain Tensioner Components”
“1st Timing Chain and Chain Tensioner Components”
“Camshafts, Tappet and Shim Components”
“Valves and Cylinder Head Components”
“Pistons, Piston Rings, Connecting Rods and Cylinders Components”
“Main Bearings, Crankshaft and Cylinder Block Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
Timing chain cover bolt and nut 11 1.1 8.0
)
Idler pulley nut 42 4.2 30.5
)
Generator belt tensioner bolt 25 2.5 18.5
)
Crankshaft pulley bolt 150 15.0 108.5
)
Camshaft timing sprocket bolt 80 8.0 57.5
)
Timing chain tensioner adjuster No.2 bolt 11 1.1 8.0
)
Timing chain tensioner adjuster No.2 nut 45 4.5 33.0
)
Timing chain tensioner nut 25 2.5 18.0
)
Timing chain tensioner adjuster No.1 bolt 11 1.1 8.0
)
Timing chain guide No.1 bolt 9 0.9 6.5
)
Camshaft housing bolt Tighten 11 N
⋅
m (1.1 kgf-m, 8.0 lb-ft) by the
specified procedure
)
/
)
Cylinder head bolt (M10) Tighten 52 N
⋅
m (5.2 kgf-m, 38.0 lb-ft), 82
N
⋅
m (8.2 kgf-m, 59.5 lb-ft), 0 N
⋅
m (0 kgf-m,
0 lb-ft), 52 N
⋅
m (5.2 kgf-m, 38.0 lb-ft) and
103 N
⋅
m (10.3 kgf-m, 74.5 lb-ft) by the
specified procedure
)
Cylinder head bolt (M6) 11 1.1 8.0
)
Connecting rod bolt Tighten 15 N
⋅
m (1.5 kgf-m, 11.0 lb-ft), 45
°
and 45
°
by the specified procedure
)
/
)
Crankcase bolt with 10 mm thread diameter ((1)
– (10)) Tighten 40 N
⋅
m (4.0 kgf-m, 29.0 lb-ft), 0
N
⋅
m (0 kgf-m, 0 lb-ft), 40 N
⋅
m (4.0 kgf-m,
29.0 lb-ft), 58 N
⋅
m (5.8 kgf-m, 42.0 lb-ft) by
the specified procedure
)
Crankcase bolt with 8 mm thread diameter ((11)
– (22)) Tighten 26 N
⋅
m (2.6 kgf-m, 19.0 lb-ft) by the
specified procedure
)
CKP sensor bolt 11 1.1 8.0
)
Flywheel or drive plate bolt 70 7.0 51.0
)
Engine front mounting bracket bolt 55 5.5 40.0
)
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft