Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 803 / 861

SL-27
Security System
SECURITY AND LOCKS
CAUTION:
• Security alarm ON/OFF setting
At the time of shipment from the factory, the security alarm is set to “ON”. However, when {Security
setting initialization} is performed with the Subaru Select Monitor, the security alarm automatically is
set to “OFF”. When security initialization has been performed, always return the ON/OFF setting for
the security alarm to “ON”.
• Siren YES/NO setting
The {Siren YES/NO} setting of the item {Unit customization} of the Subaru Select Monitor always
shall be set to “NO”. If it is set to “YES”, the horn of the security alarm will not sound.
7 CHECK SECURITY ALARM OPERATION.
1) Unlock all doors using the door lock switch
on driver’s door.
2) Open any door or rear gate.
Does the security alarm oper-
ate when opening any door or
rear gate? Go to step
8
. • Check the door
switch. <Ref. to
SL-29, CHECK
DOOR SWITCH,
INSPECTION,
Security System.>
• Check the rear
gate latch switch.
<Ref. to SL-30,
CHECK REAR
GATE LATCH
SWITCH.,
INSPECTION,
Security System.>
8 CHECK SECURITY ALARM OPERATION.
Check the security alarm operation.
Does all of the following secu-
rity alarm operate?
•Horn sounds
•Hazard light blinks
•Security indicator light illumi-
nates Go to step 9 . • Check horn.
<Ref. to SL-31,
CHECK HORN,
INSPECTION,
Security System.>
• Check the haz-
ard light. <Ref. to
SL-32, CHECK
HAZARD LIGHT
OPERATION,
INSPECTION,
Security System.>
9 CHECK SECURITY ALARM CANCEL OPER-
ATION.
Press any button of transmitter while operating
security alarm. Or turn the ignition switch to
OFF
→
ON three times.
Does all of the following secu-
rity alarm stop?
•Horn stops
•Hazard light stops Go to step
10
. Check the ignition
switch circuit.
<Ref. to SL-32,
CHECK IGNITION
SWITCH CIRCUIT,
INSPECTION,
Security System.>
10 CHECK SECURITY SYSTEM CONDITION
MEMORY.
Check that the system function properly when
the battery is not connected temporally. <Ref. to
SL-28, CHECK SECURITY SYSTEM CONDI-
TION MEMORY, INSPECTION, Security Sys-
tem.>
Does the system function prop-
erly when the battery is not con-
nected temporally? Go to step 11 . Replace the body
integrated unit.
<Ref. to SL-51,
Body Integrated
Unit.>
11 CHECK IMPACT SENSOR.
Check the sensibility of impact sensor. <Ref. to
SL-48, CHECK IMPACT SENSOR, ADJUST-
MENT, Impact Sensor.>
Is the sensibility set properly? Press the
UNLOCK button of
keyless transmit-
ter, and finish the
diagnosis. Adjust the sensibil-
ity. <Ref. to SL-48,
IMPACT SENSI-
TIVITY ADJUST-
MENT,
ADJUSTMENT,
Impact Sensor.>
Step Check Yes No
asieps_tobira.book 27 ページ ２０１２年２月１０日 金曜日 午後３時２６分