Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 765 / 861

SE-23
Power Seat System
SEATS
• Passenger’s seat 4. CHECK MEMORY SWITCH (MEMORY-
EQUPPED)
Move each switch and measure the resistance be-
tween connector terminals.
5. ALL FUNCTION FAILS TO OPERATE. (DRIVER’S SEAT, WITHOUT MEMORY)
Switch position Terminal No. Standard
Slide forward
7 and 13
8 and 14
Less than 10 Ω
Slide backward
7 and 14
8 and 13
Less than 10
Ω
Reclining forward
7 and 4
8 and 3
Less than 10
Ω
Reclining backward
7 and 3
8 and 4
Less than 10
Ω
5 4
3
8 7
6 2 1
11 9 10 12 14 13
SE-00682
Switch position Terminal No. Standard
Memory 1 3and 1 Less than 10
Ω
Memory 2 2 and 1 Less than 10
Ω
Set 8 and 1 Less than 10 Ω
5 4 3 8 7 6 2 1
SE-00683
Step Check Yes No
1 CHECK SEAT FUNCTION.
Operate each power seat switch and check that
each power seat function operates normally.
Does all function fails to oper-
ate? Go to step 2 . Check the motor
which does not
operate. <Ref. to
SE-24, SOME OF
THE MOTOR DO
NOT OPERATE.
(DRIVER’S SEAT,
WITHOUT MEM-
ORY), INSPEC-
TION, Power Seat
System.>
2 CHECK FUSE.
Check the power seat fuse inside the fuse box.
Is the fuse blown out? Replace the appro-
priate fuse. Go to step 3 .
3 CHECK POWER SUPPLY CIRCUIT.
1) Disconnect the connector of power seat
switch assembly.
2) Measure the voltage between harness con-
nector and chassis ground.
Connector & terminal
(R190) No. 7 — Chassis ground:
Is the voltage 10 V or more? Go to step
4
. Check body har-
ness.
4 CHECK POWER SUPPLY CIRCUIT.
Measure the resistance between power seat
switch harness connector and chassis ground.
Connector & terminal
(R190) No. 8 — Chassis ground:
Is the resistance less than 10
Ω
? Replace the power
seat switch assem-
bly.
Check body har-
ness.
asieps_tobira.book 23 ページ ２０１２年２月１０日 金曜日 午後３時２６分