Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 562 / 861

IDI-5
Combination Meter System
INSTRUMENTATION/DRIVER INFO
2. LIST OF SELF-DIAGNOSIS MODE OPERATION
Speedometer,
tachometer, fuel
gauge, engine
coolant temper-
ature gauge Microcomputer
running type
warning light,
indicator light AT select lever
position indica-
tor light Odo/Trip indica-
tor SPORT shift
indicator Illumination
(indicator nee-
dle, plate, ring,
LCD) Buzzer (SPORT
shift buzzer)
Step 0. Processing to self-diagnosis function
Operating initial
operation
Initial illuminat-
ing Normal Normal Initial illuminat-
ing Initial illuminat-
ing Not beep.
Step 1-1. Check each indication after initial operation
Repeat the
sweep operation
(After holding on
lowest position
for one second,
reaches to high-
est position
within 5 sec-
onds, and after
holding on high-
est position for
one second,
reaches to low-
est position
within 5 sec-
onds).
Light ON With the high-
est brightness,
illuminate the
position sequen-
tially at a cycle
of 1.5 seconds.
For the illumina-
tion order, refer
to the illumina-
tion order table. Perform the seg-
ment check. For
the illumination
order, refer to
the illumination
order table. Perform the seg-
ment check. For
the illumination
order, refer to
the illumination
order table. Light at the
highest bright-
ness. Not beep.
Step 1-2. Press the trip knob (trip knob input is not accepted till the meter indicator needle reaches the highest position): sweep
complete, AT select lever position indicator display is set
After complet-
ing sweep in
step 1-1, back
to lowest posi-
tion.
Light ON Keep the posi-
tion indicated
when the trip
knob is pressed. Underbar “ _ ” is
displayed. “1” is displayed. Light at the
highest bright-
ness. Not beep.
Step 2-1. Press the trip knob, and hold it: Check each meter
All meters are
moved simulta-
neously in every
0.5 sec. from
the lowest posi-
tion to highest
position.
Speedometer/
Tachometer:
Approx. 5
degrees at
every move-
ment.
Water tempera-
ture /Fuel
gauge: Moves 1
segment at a
time.
Light OFF Keep the posi-
tion indicated
that set in step
1-2. Display the cur-
rent meter
directing angle
on odometer.
Ex.) Displays
135017 when
Speedometer/
Tachometer:
135 degrees,
Water tempera-
ture gauge/Fuel
gauge: 17 seg-
ments. “ 2” is dis-
played.
Light at the
highest bright-
ness. Not beep.
Step 2-2. Release the trip knob: Specifying the meter directing position
Stop at direct-
ing position
when the trip
knob is
released.
Light OFF Keep the posi-
tion indicated
that set in step
1-2. Display the cur-
rent meter
directing angle
on odometer. “2” is displayed. Light at the
highest bright-
ness. Not beep.
Step 3-1. Press the trip knob, and hold it: Check illumination
asieps_tobira.book 5 ページ ２０１２年２月１０日 金曜日 午後３時２６分