Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 848 / 861

WW- 8
Combination Switch (Wiper)
WIPER AND WASHER SYSTEMS
3. REAR WIPER
1) Check with Subaru Select Monitor
Step Check Yes No
1 CHECK INPUT OF REAR WIPER SWITCH.
Check the input from body integrated unit using
the Subaru Select Monitor.
1) Connect the Subaru Select Monitor to data
link connector.
2) Turn the ignition switch to ON.
3) Select {Integ. unit} from main menu.
4) Select the {Current Data Display & Save}.
5) Check the input of the rear wiper switch.
Is the input normal? Go to step 2 . Check the rear
wiper switch. <Ref.
to WW-6, INSPEC-
TION, Combina-
tion Switch
(Wiper).>
2 CHECK OUTPUT OF BODY INTEGRATED
UNIT.
When the rear wiper switch is operated, check
the output using the Subaru Select Monitor.
1) Turn the ignition switch to ON.
2) Operate the rear wiper switch and set to
each position of ON and INT.
3) At this time, check the body integrated unit
output.
When set to ON, is ON output
continuous? When set to INT, is
ON/OFF output repeated? (INT
OFF time (when vehicle
parked): 12 seconds) Check the rear
wiper motor. <Ref.
to WW-19,
INSPECTION,
Rear Wiper
Motor.> Replace the body
integrated unit.
<Ref. to SL-51,
Body Integrated
Unit.>
asieps_tobira.book 8 ページ ２０１２年２月１０日 金曜日 午後３時２６分