Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 796 / 861

SL-20
Keyless Entry System
SECURITY AND LOCKS
10.CHECK REAR GATE RELEASE ACTUATOR OPERATION
Step Check Yes No
1 CHECK REAR GATE RELEASE ACTUATOR
OPERATION.
1) Turn the ignition switch to OFF.
2) Disconnect the key warning switch harness
connector.
3) Connect the Subaru Select Monitor to data
link connector.
4) Turn the ignition switch to ON.
5) Select {Integ. unit} from main menu.
6) Select the {Current Data Display & Save}.
7) Check the rear gate release output signal of
body integrated unit when operating the LOCK/
UNLOCK button of keyless transmitter.
Is output signal is present when
operating the transmitter
LOCK/UNLOCK button? Go to step
2
. Check the body
integrated unit.
<Ref. to
LAN(diag)-2, Basic
Diagnostic Proce-
dure.>
2 CHECK THE CIRCUIT OF REAR GATE RE-
LEASE ACTUATOR.
1) Disconnect the harness connector of body
integrated unit (i84).
2) Disconnect the rear gate release actuator
harness connector (D140).
3) Measure the resistance between harness
connectors.
Connector & terminal
(i84) No. 22 — (D140) No. 1:
Is the resistance less than 10 Ω ? Go to step 3 . Repair the har-
ness.
3 CHECK CIRCUIT OF HAZARD LIGHT.
1) Check the ground circuit of rear gate
release actuator
2) Disconnect the rear gate release actuator
harness connector (D140).
3) Measure the resistance between harness
connector terminal and chassis ground.
Connector & terminal
(D140) No. 2 — Chassis ground:
Is the resistance less than 10 Ω ? Check the trunk lid
lock actuator. <Ref.
to SL-42, INSPEC-
TION, Rear Gate
Latch Assembly.>
Repair the har-
ness.
asieps_tobira.book 20 ページ ２０１２年２月１０日 金曜日 午後３時２６分