Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 343 / 861

EB-14
Front Hood
EXTERIOR BODY PANELS
4) Remove the front fender. <Ref. to EB-15, RE-
MOVAL, Front Fender.>
5) Remove the bolts of front hood hinge.
5. FRONT HOOD STRIKER
Refer to the front hood lock assembly of SL section.
<Ref. to SL-43, Front Hood Lock Assembly.>
6. FRONT HOOD PANEL
1) Remove the front hood insulator.
2) Open the front hood to remove the window
washer hose.
3) Remove the front hood weather strip.
4) Remove the hood lock assembly.
<Ref. to SL-43, REMOVAL, Front Hood Lock As-
sembly.>
5) Remove the window washer hose and nozzle.
<Ref. to WW-17, REMOVAL, Front Washer Noz-
zle.>
6) Remove the front hood damper.
7) Remove the bolt, and remove the front hood
panel from the front hood hinge.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Be careful not to catch the window washer hose in.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”. <Ref. to EB-7, FRONT HOOD, COMPO-
NENT, General Description.>
C: ADJUSTMENT
1) Adjust the clearance between front hood panel
and front fender panel. Clearance must be equal at
both sides. For the dimension of clearance, refer to
“SPECIFICATION” in “General Description”. <Ref.
to EB-2, SPECIFICATION, General Description.>
2) Use the hinge mounting bolts to align the front
hood longitudinal and lateral position.
3) Adjust the height at the front end of hood. <Ref.
to SL-43, ADJUSTMENT, Front Hood Lock Assem-
bly.>
4) Rotate the hood buffer to adjust lateral height.
D: DISPOSAL
For the disposal procedures of front hood damper
stay, refer to the disposal procedures of rear gate
damper stay. <Ref. to EB-24, REAR GATE DAMP-
ER STAY, DISPOSAL, Rear Gate.>
EB-00286
EB-00285
EB-00285
EB-00287
asieps_tobira.book 14 ページ ２０１２年２月１０日 金曜日 午後３時２６分