Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 568 / 861

IDI-11
Combination Meter System
INSTRUMENTATION/DRIVER INFO
8 . CHECK ENGINE COOLANT TEMPERATURE SENSOR
9. COMMUNICATION ERROR DISPLAY
When the following error code is displayed in the
odo/trip meter, inspect the communication circuit
since the communication malfunction is generated
between each control module. <Ref. to LAN(diag)-
2, Basic Diagnostic Procedure.>
10.DTC DISPLAY MODE
When DTC display mode is operated, {ECM}, {TCM} is displayed repeatedly in this order by pressing the trip
knob. DTC is displayed in the following table according to type of control module, receiving DTC, DTC de-
tected, No DTC. If CAN communication has some trouble, “-----” is displayed.
Step Check Yes No
1 CHECK COMMUNICATION ERROR DIS-
PLAY.
1) Turn the ignition switch to ON.
2) Check that the error code is displayed in
odo/trip meter.
Is the error code “Er xx” dis-
played on odo/trip meter? Check the commu-
nication circuit.
<Ref. to IDI-11,
COMMUNICA-
TION ERROR DIS-
PLAY,
INSPECTION,
Combination Meter
System.> Go to step
2
.
2 CHECK ENGINE COOLANT TEMPERATURE
SENSOR.
Check the engine coolant temperature sensor.
<Ref. to EN(H6DO)(diag)-2, Basic Diagnostic
Procedure.>
Is the engine coolant tempera-
ture sensor OK? Replace the meter
case assembly. Replace the
engine coolant
temperature sen-
sor.
IDI00188
Error code Description
Er IU
Malfunction in integrated
module
Er ––
Simultaneous malfunction of
high/low speed CAN com-
munication
Er HC
High speed CAN communi-
cation failure
Er LC
Malfunction of low-speed
CAN communication
Er EG EGI Communication failure
Er TC TCM Communication failure
Er Ab
VDCCM communication fail-
ure
Er SP
VDCCM DTC information
and vehicle speed pulse
malfunction
Er SS
Wheel speed data malfunc-
tion
Er bb
Vacuum pump system mal-
function
Control module Condition Display
ECM
Receiving DTC Trip “A” + “P (Blink)”
DTC detected Trip “A” + “P xxxx”
No DTC Trip “A” + “P ----”
TCM
Receiving DTC Trip “B” + “P (Blink)”
DTC detected Trip “B” + “P xxxx”
No DTC Trip “B” + “P ----”
When CAN communication error
is occurred
— “-----”
asieps_tobira.book 11 ページ ２０１２年２月１０日 金曜日 午後３時２６分