Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 597 / 861

LAN(diag)-22
Subaru Select Monitor
LAN SYSTEM (DIAGNOSTICS)
Siren setting OFF
ON
Siren sounds when alarm operates.
(Set siren setting to “OFF” in model without siren.
Horn does not sound if siren setting is set to “ON”.)
Not supported by North
American specifications
OFF Horn sounds when alarm operates.
Answer-back
buzzer setup
ON
ON
Workable when answer-back buzzer setup is set to
“ON”.
When lock/unlock is selected by keyless entry system
operated, hazard answer-back buzzer operates.
OFF
When lock/unlock is selected by keyless entry system
operated, answer-back buzzer does not sound.
Hazard
answer-back
setup
ON
ON
Workable when hazard answer-back setup is set to
“ON” When lock/unlock is selected by keyless entry
system operated, hazard answer-back buzzer
operates.
OFF
When lock/unlock is selected by keyless entry system
operated, hazard answer-back does not operate.
Automatic
locking setup
ON
ON
Workable when Automatic locking setup is set to “ON”
Automatic locking operates.
Not supported by North
American specifications
OFF Automatic locking does not operate.
Ans.-back
Buzzer
ON
ON
Vehicle is controlled in answer-back buzzer equipped
mode.
Not supported by North
American specifications
OFF
Vehicle is controlled in answer-back buzzer non-
equipped mode.
(Set Ans.-back Buzzer to “OFF” in model without
answer back buzzer.)
Auto locking ON
ON Vehicle is controlled in auto locking equipped mode.
Not supported by North
American specifications
OFF
Vehicle is controlled in auto locking non-equipped mode.
(Set Auto locking to “OFF” in model without auto locking.)
Initial Keyless
Setting
—
— —
Execution
Settings of keyless entry system are initialized.
(Auto-lock time: 30 sec., Answer-back buzzer setup:
ON, Hazard answer-back setup: ON, Automatic lock-
ing setup: ON, Ans.-back Buzzer: ON)
Initial button
setting
—
— — (Off delay time: Normal, R
defogger op. mode:
15 min., Wiper deicer op.
mode: 15 min., Lockout
prevention: ON)
Execution Settings of each function are initialized.
Initial Security
setting
—
— —
Not supported by North
American specifications
Execution Settings of security system are initialized.
Passive Alarm
(Not used)
OFF
ON
Workable when passive arming is set to “ON.”
OFF
Door open
warning
(prevention of
battery run-out)
OFF
ON
If detecting door open for 30 minutes, room light, key
illumination and door warning light are turned off to
prevent battery run-out.
OFF
Room light, key illumination and door warning light is
not turned off.
Alarm inter-
locked room
light switch
OFF
ON
The room light lights by being interlocked with the
activation of the alarm.
OFF
Room light does not illuminate even if the alarm is
activated.
Data
Initial setting
value
Customize
setting
Remarks Destination Specifications
asieps_tobira.book 22 ページ ２０１２年２月１０日 金曜日 午後３時２６分