Subaru B9 TRIBECA WX 2007, Руководство пользователя

Страница: 593 / 861

LAN(diag)-1 8
Subaru Select Monitor
LAN SYSTEM (DIAGNOSTICS)
5. CONFIRMATION OF CURRENT SETTING
1) On the «Main Menu» display screen, select the {Each System Check}.
2) On the «System Selection Menu» display screen, select the {Integ. unit mode}.
3) On the «Integ. unit mode failure diag» display screen, select the {Current Data Display & Save}.
4) On the «Current Data Display & Save» display screen, select the {12 Data Display}.
5) Using the scroll key, scroll the display screen up or down until the desired data is shown.
6) Display the following item and record the settings.
Required items for new registration (Except for system not equipped)
Item Item to confirm Remarks
Key No. to register 1 2 3 4 Registered ID type
Off delay OFF Long Normal Short Setting for lighting off time
Auto-lock 60, 50, 40, 30, 20 OFF Not supported by North American specifications(Unit sec.)
Rr defogger op. mode Normal Continuous
Normal: Off at 15 minutes of operation
Continuous: Operations from switch on to off
Wiper deicer op. mode Normal Continuous
Normal: Off at 15 minutes of operation
Continuous: Operations from switch ON to OFF, repeats
ON for 15 minutes, OFF for 2 minutes
Security Alarm Setup ON OFF
ON: Warning device operation possible
OFF: Warning device does not operate
Impact Sensor Setup ON OFF
ON: Impact sensor operation possible
OFF: Impact sensor does not operate
Turn OFF for vehicles not equipped with an Impact Sen-
sor
Alarm monitor delay setting ON OFF
ON: Monitor after a fixed period of time from reception of
the keyless lock signal
OFF: Monitor after reception of the keyless lock signal
Lockout prevention ON OFF Not supported by North American specifications
Impact Sensor Yes No
Yes: Impact sensor equipped
No: Impact sensor not equipped
Always set to no for vehicles not equipped with the impact
sensor.
Siren setting Yes No Not supported by North American specifications
Answer-back buzzer setup ON OFF
ON: Answer-back buzzer operation possible
OFF: Answer-back buzzer not operated
Hazard answer-back setup ON OFF
ON: Hazard answer-back buzzer operation possible
OFF: Hazard answer-back buzzer not operated
Automatic locking setup ON OFF Not supported by North American specifications
Ans.-back Buzzer Yes No
Yes: Vehicle equipped with answer-back buzzer
No: Vehicle not equipped with answer-back buzzer
Auto locking Yes No
Not supported by North American specifications
(Set to OFF)
Door open warning
(prevention of battery run-out)
Yes No
Yes: Door interlocked room light goes off when on for 10
minutes consecutively when door is open.
No: Room light remains illuminated until door is closed.
Alarm interlocked room light
switch Yes No Yes: Room light continuously lit while the alarm is
triggered.
No: Even if the alarm is triggered, the room light
illuminates and then turns off.
Map light interlocked
switching Yes No Yes: The map light illuminates together with the door
interlocked room light.
No: Does not illuminate together with the door interlocked
room light.
A/C ECM setting Yes No Model with auto A/C (Set to ‘Yes’)
P/W ECM setting Yes No Not supported in North American specifications (Set to No)
asieps_tobira.book 18 ページ ２０１２年２月１０日 金曜日 午後３時２６分