BM74
Backhoe Set Up
STEP 1.
As mentioned earlier, your
Backhoe pallet should be butt up against
your RS1000 pallet as shown in the pic-
ture to the right, or be as close to the
same height as possible
STEP 2.
Remove the (2) 1/2” bolts and
(2) 1/2” nuts (marked A) as shown in the
area to the right. Note: Some machines
may not have this backhoe bracket
mounted & bolts and nuts may be packed
in a separate bag.
STEP 3.
Start your MAGNATRAC, by fol-
lowing your starting instructions from
Section 4 in your MAGNATRAC manual.
Back up your machine until it is approx.
6” away from the backhoe frame. Note:
Make sure to not puncture any hoses with
any potruding bolts. Turn off your ma-
chine.
STEP 4.
Loosen and remove the (3)
nuts from the B marked areas on your
angle mount bracket. (Do the same to the
angle mount on the opposite side of your
machine.
A
A
B
B
B
B
B
B
Backhoe Bracket
B
Angle
Mount
B
B
