BM103
BA
BA
1755
1755
KK
KK
NOTE: In the following instruc-
tions you will be installing two (2)
#1755 Springs... follow instruc-
tions carefully to prevent
personal injury.
STEP 6.
Using two (2) #Q Bolts and
#HH Nuts assemble
lower end
of
#1714 Trip Handle to
inside face
of
#1713 Bucket Hitch “lever”... rotate
Trip Handle [front to rear] to fit you the
best... tighten both #HH Nuts.
STEP 7.
Have a “helper” pull up and
HOLD #1714 Trip Handle. On
left end
of #1713 Bucket Hitch “channel sec-
tion”, insert a #1755 Spring between
underside
of “angle” and
top side
of
“channel section”... align 3/8” hole in
“angle” with mating 3/8” hole in top
of “channel section”.
STEP 8.
Per Photo at left, insert a
#BA Bolt through the 3/8” holes and
Spring
aligned
above... secure Bolt
below with #KK Nut... tighten.
STEP 9.
Repeat STEP 8 above and
install a #1755 Spring on right end of
#1713 Bucket Hitch “channel section”.
Q Bolts &
HH Nuts
1713
Bucket
Hitch
“lever”
1713
Bucket
Hitch
“angle”
1714
1713
Bucket
Hitch
“channel
section”
