BM26
1906 Cotter Pin
4132 Handle
4130
Hitch
Channel
Left
Channel
“side”
2579 Washers
STEP 5.
Per Photo at right, in-
sert
end
of #4132 Handle into two (2)
parallel 7/8” holes in
top
of #4130 Hitch
Channel.
Secure
left end
of Handle with
two (2) #1906 Cotter Pins on
left and
right face
of Left Channel “side”... add
#2579 Washers on either side of left
Channel “side” to stop left to right move-
ment... “clinch” both Cotter Pins.
STEP 6.
Slip #AD Bolt into #TT
Washer and insert into
upper
3/8” hole
in
outside face
of “arm” of #4132 Han-
dle. On reverse side, slip Bolt into sec-
ond #TT Washer and then into top 3/8”
hole of #4131 Link... secure with #KK
Nut... leave loose.
In a similar manner, Slip second
#AD Bolt into #TT Washer and then into
lower
3/8” hole in
outside face
of #4131
Link. On reverse side, slip Bolt into sec-
ond #TT Washer and then into the third
3/8” hole from the rear on
outside face
of “side wall” of #1693 Bail... see Photo
at right... add third #TT Washer and se-
cure with #KK Nut... leave loose.
Rotate #4132 Handle and
tighten the two #KK Nuts [you installed
above] so the rotary action is not
pinched,
but still is a “snug” fit. Check
Photos above and near right!
NOTE:
Save your #126 Pin for secur-
ing future Attachments you wish to
mount to your Rear Hitch.
4132 Handle
4131
Link
4131
Link
#4132Handle
“arm”
TT (3)
TT (3)
AD
AD
KK
KK
1693 Bail
“side wall”
