Objet260 User Guide
5 Using Objet Studio
DOC-37004 Rev. E
5-55
Handling Trays
After preparing models on the build tray, you can do the following:
• Test that it can be printed ("validation").
• Calculate the time and material resources needed to print it.
• Send it to the printer for production.
• Save it for later completion or printing.
• Save it as a compressed file for convenient storage and transfer.
Tray Validation
Before sending a job to the printer for production, you should check that the
tray is “valid” and can be printed.
Note:
Because of the unique characteristics of each type of modeling material,
make sure that the correct material is selected
before
performing Tray Validation.
To validate that the tray can be printed:
➢
On the
Tray Settings
ribbon, in the
Build Process
group, click
.
or—
From the
Tools
menu, select
Placement Validation
.
If the tray is not valid, the color of the problematic models on the tray
changes according to a pre-set code.
Figure 5-69 Color code
Note:
The “Both” color also indicates a problematic
stl
file.
The validation status appears on the bar at the bottom of the screen.
Figure 5-70 Validation details in status bar
