Objet260 User Guide
5 Using Objet Studio
DOC-37004 Rev. E
5-51
Setting Object
Colors
The color of objects on the build tray can indicate how they are printed. Objet
Studio enables you to choose the color display so that you can easily see the
material, surface and coating of objects.
To choose how colors are applied on the display:
➢
On the
Model Settings
ribbon, in the
Colors
group, select one of the
options from the flyout toolbar.
Figure 5-63
Colors
display options
Before sending a build tray to the printer, or when you perform
tray
validation
, Objet Studio checks if there is a problem with the
stl
files or the
positioning of objects on the tray. If so, the affected objects are displayed
with special colors (see "Tray Validation" on page 5-55).
Loading Large
Files
Very large
stl
files can be slow to load and may be difficult to manipulate
easily on the build tray. If this is the case, you can display just an image of the
object on the build tray without loading the entire file. The
stl
file itself is not
changed, and the complete file is sent to the printer.
To display an image of
stl
files when you place objects on the build tray:
1. From the
Tools
menu, select
Options
, and display the
Settings
tab.
Figure 5-64
Options
dialog box,
Settings
tab
2. In the
Large Files
section, select
Load Partial (reduced)
.
