Objet260 User Guide
6 Operating and Maintaining the Objet260 3D Printer
DOC-37004 Rev. E
6-64
Figure 6-93 Label on the bottom of the UV sensor box
The build tray lowers.
2. Connect the UV sensor cable to the connector in the printer.
Figure 6-94 UV sensor connector in the printer
3. Position the UV sensor as shown in the wizard screen.
To ensure that the sensor cable does not interfere with the build tray when
it is raised, route it in
back
of the sensor.
Figure 6-95 Sensor positioning
4. Confirm the items listed in the wizard screen and click
Next
.
