Objet260 User Guide
6 Operating and Maintaining the Objet260 3D Printer
DOC-37004 Rev. E
6-78
Test List
Test Name
This column lists all of the tests, together with selection check boxes.
Click the check boxes to select the tests you want to run. To remove a
selection, click the check box again. To quickly select all of the tests in a
component category, use the
Group
drop-down list at the bottom of the
screen.
Group
This column shows the component categories for each test.
This tells you which tests are run when selecting a category from the
Group
drop-down list at the bottom of the screen.
Status
This column shows the results of each test after you run it:
Test successfully completed.
Test failed.
Unknown results. (The test has not been run yet.)
Test Selection Area
In the
Test Selection
area, at the bottom of the screen, you can quickly select
or de-select tests by their characteristics:
All
Click to select all of the tests in the list.
None
Click to de-select all of the tests in the list.
Unknown
Click to select all test that have not been run yet (Status = ?).
Group
Use this menu to select tests by component category.
Selection Set
Use this menu to select a pre-configured set of tests to run at
specified times (computer startup, before printing, etc.).
Running Built-in Tests
To run the selected tests:
➢
Click
.
After you run a test, the
Save
and
View
command buttons are added to
the
Built In Tests
screen.
