Objet260 User Guide
5 Using Objet Studio
DOC-37004 Rev. E
5-53
2. In the
Options
dialog box, display the
Display
tab.
Figure 5-67
Options
dialog box,
Display
tab
3. Select
Enable Polygon Reduction
.
4. Select
Polygon Reduction (Percent)
.
5. Enter the percentage of total polygons to display.
When you click
Apply
, the display changes.
Note:
The setting affects the static display (when the object is not being
moved).
6. Set display options when the object is being moved (
Display while
changing view
):
❒
Bounding Box—
A box representing the object’s maximum dimensions
is displayed.
❒
Adaptive Polygon Reduction—
Varying degrees of polygon reduction
are applied, as necessary.
❒
Entire Object—
No polygon reduction is applied.
7. To save these settings, so that they will be applied every time you place
this object
on the build tray, click
Save Polygon Reduction Data
.
8. Click
Apply
to see the results of the settings without closing the dialog box.
Selecting the
Entire Object
option cancels polygon reduction.
