Integrated Bus
ID 442289.06
88
Operation manual POSIDYN® SDS 5000
11
WE
KEEP
THINGS
MOVING
11. On the right side of the assistant, click the button
map parameter
.
The following dialog screen appears:
12. In the top part of the dialog screen, set the inverter which is to receive data.
13. Set which parameter value is to be read.
14. In the bottom part of the dialog screen, set whether the parameter value is to be written to an axis or a
global parameter.
15. Set the parameter to which the value is to be written.
16. Confirm the dialog screen with the
OK
button.
The mapped parameter is indicated as shown below:
17. Repeat steps 10 to 16 for each inverter which is to receive parameters and for each parameter value
which is to be received.
18. Confirm the dialog screen with the
OK
button.
19. Transfer the settings to the inverters and save them.
20. Switch the 24-V power supply off and on again for all inverters.
You have parameterized the process data.
