Integrated Bus
ID 442289.06
80
Operation manual POSIDYN® SDS 5000
11
WE
KEEP
THINGS
MOVING
11.2.7
Writing data to the inverter
To write data to the inverter, proceed as shown below:
Writing data to the inverter
1. Click the Send to
IGB...
button in the
IGB: display connected devices
dialog screen.
The following dialog screen appears:
2. Highlight the line of the inverter to which you want to write data.
3. In this line, double click the first column
Source (PC)
.
A selection list appears in which all inverter entries are listed which contain your project.
4. Select the inverter entry which you want to write to the selected inverter.
5. In this line, double click the
Action
column.
A selection list appears in which you can set whether you want an automatic adjustment or whether
the previously stored configuration and the parameters are to be overwritten.
6. Select one of the actions.
7. Repeat steps 2 to 6 for each inverter to which you want to write data.
8. Click the
OK
button.
The data are written to the inverters as specified by you.
