Spectracom NetClock 9400 Series, Руководство пользователя

Страница: 69 / 467

arp -s 192.168.0.10 00:AA:11:BB:22:CC
ping -s 408 192.168.0.10
Note: You must complete this process within 5 minutes of the system booting, or
else you will need to restart the NetClock system, and then restart from step 4. This
is also a temporary IP address that will not persist through power cycles.
6.
Open a web browser and enter the NetClock‘s IP address into the browser‘s address
bar to access the NetClock Web UI. Login as an administrator. Navigate to
MANAGEMENT > Network Setup and set your permanent IP configuration and network
settings.
2.11.4 Subnet Mask Values
Table 2-2:
Subnet mask values
Network Bits Equivalent Netmask Network Bits Equivalent Netmask
30 255.255.255.252 18 255.255.192.0
29 255.255.255.248 17 255.255.128.0
28 255.255.255.240 16 255.255.0.0
27 255.255.255.224 15 255.254.0.0
26 255.255.255.192 14 255.252.0.0
25 255.255.255.128 13 255.248.0.0
24 255.255.255.0 12 255.240.0.0
23 255.255.254.0 11 255.224.0.0
22 255.255.252.0 10 255.192.0.0
21 255.255.248.0 9 255.128.0.0
20 255.255.240.0 8 255.0.0.0
19 255.255.224.0
2.12 Accessing the Web UI
NetClock's web user interface ("Web UI") is the recommended means to interact with the unit,
since it provides access to nearly all configurable settings, and to obtain comprehensive status
information without having to use the Command Line Interpreter (CLI).
2.12 Accessing the Web UI
CHAPTER
2
•
NetClock User Reference Guide Rev. 16
53