Spectracom NetClock 9400 Series, Руководство пользователя

Страница: 63 / 467

2.11.2.2 Setting Up an IP Address via the Front Panel
Note: This topic applies only to NetClock 9483 units. If you are setting up a NetC
lock 9489 unit (which does not have a front panel information display and
keypad), see "Setting Up a Temporary IP Address Remotely" on page 51 .
Assigning an IP address to NetClock, using the front panel keypad and information display is a
preferred way to provide network access to the unit, thus enabling you thereafter to complete
the setup process via the Web UI.
Keypad Operation
The functions of the six keys are:
< > arrow keys : Navigate to a menu option (will be highlighted)
˄ ˅
arrow keys : Scroll through parameter values in edit displays
ENTER key: Select a menu option, or load a parameter when editing
BACK key : Return to previous display or abort an edit process
An illustration showing how to navigate the front panel menu tree can be found here: "Front
Panel Keypad, and Display" on page 6
IP configuration, step-by-step instructions:
A.
Disable DHCP:
1.
Press the key.
2. Using the arrow key, select
Netv4
from the menu.
(To select a menu item,
highlight
it using the arrow keys, then press the key.)
3. Select the Ethernet interface for which DHCP is to be disabled, such as
eth0
.
4. Select
DHCP
from the next menu. The display will show
State=Enabled
and
Action=Disabled
.
(The State is the current DHCP setting and the Action is the action to take. You can
only change the Action setting.)
2.11 Setting up an IP Address
CHAPTER
2
•
NetClock User Reference Guide Rev. 16
47