Sony PCV-RS220 Online Help Center (User Guide), Руководство пользователя

Страница: 28 / 114

Capturing digital video with DVgate software
1.
Connect an i.LINK
®
cable (optional) between the i.LINK ports on your computer and on a compatible digital video
(DV) camera.
2.
Turn on the DV camera and insert a videotape. Set the camera to Recording mode. (On some camera models this
is called VCR or VTR mode.)
3. From the Windows
®
taskbar, click Start , point to All Programs , point to DVgate , and then click DVgate Motion .
The DVgate Motion software starts.
4.
Select IMPORT - Auto from the MODE list in the DVgate Motion window, and click SCAN .
The DVgate Motion software scans your tape and creates a list of video clips to be captured. The list appears in
the
IN/OUT list window.
You can manually specify video clips to be captured while viewing playback of your tape in the Monitor window.
Refer to the DVgate Help for more information.
5. If necessary, edit the list of video clips to be captured.

Delete a clip from the list by selecting it, and then clicking DELETE .

Change the order in which clips are captured by dragging them up or down on the list.
 To capture all the video clips on the IN/OUT list, click CAPTURE ALL .
 To capture an individual clip, click it in the IN/OUT list window and click CAPTURE .
The Save as a file window appears. This window enables you specify a location on your hard disk drive
where the video clips is saved. In most cases, the default location of your D: drive partition is a good
choice. You can also specify how DVgate Motion names your clip files.

Click Save .
The Batch capturing ... window appears, and DVgate Motion captures your video clips to you hard disk
drive.
Page 28