177
UPS for 480 Vac Grid, User Guide, doc. rel.4.0
In certain unusual cases, the user may want to change the severity level of a
given message. This can be accomplished through the Setup > Alarms > Alarm
configuration screen.
Figure 166 (below) presents an example of a log file listing:
Figure 166: Log file contents listing
The full log can be exported to a USB drive for analysis.
Scroll through the log messages by sliding your finger up or down the touch-sensitive screen (or
use the UP and Down arrow keys).
To display detailed information about the system status at the time the log entry was recorded,
tap the log message in question. For example, tapping the message with the yellow triangle in
Figure 166 (UPS module #3 is sending an alarm or warning) displays the status of system
parameters at the time the fault was encountered.
