- 10 -
951-170-218-EN
Version 06
EN
1. Safety instructions
1.3 Intended use
The minimal quantity lubrication (MQL)
systems of the series UFD10 and UFD20
were designed for internal lubrication of
cutting tools for machining applications.
Internal lubrication refers to the supply of
lubricant by means of the tool spindle and
tools to the friction point between the cut-
ting edge and the workpiece.
Minimal quantity lubrication systems of se-
ries UFD10 and UFD20 are used to feed
lubricants only in compliance with the
specifications, technical data, and limits
presented in this manual.
Usage is permitted exclusively in the context
of commercial or business activity by profes-
sional users.
1.4 Foreseeable misuse
Any usage of the product other than as
specified in this manual is strictly prohibited.
Particularly prohibited are:
○
Use outside the specified operating tem-
perature range
○
Use of non-specified equipment
○
Use without a suitable pressure regulat-
ing valve
○
Use in continuous duty
○
Use in areas with aggressive, corrosive
substances (e.g., high ozone loads)
○
Use in areas with damaging radiation
(e.g., ionizing radiation)
○
Use to feed, forward, or store hazardous
substances and mixtures as defined in
Annex I Part 2-5 of the CLP Regulation
(EC 1272/2008) that are marked with
hazard pictograms GHS01-GHS 09
○
To feed / forward / store gases, liquefied
gases, dissolved gases, vapors, or fluids
whose vapor pressure exceeds normal
atmospheric pressure (1013 mbar) by
more than 0.5 bar at their maximum
permissible operating temperature
